Labconco Protector 50600 User Manual page 82

Appendix J: Replacement Gloves Installation Procedure
4. Install the new glove over the existing glove by stretching the beaded
glove cuff onto the glove port groove nearest to the window.
5. Temporarily install the O-ring and stainless-steel clamp onto the groove
nearest to the window to secure the new glove in place.
6. From the outside of the glove box, carefully loosen the old glove's
beaded cuff from the outer groove and start pushing it inside the glove
box through the new glove's material.
78
Product Service 1-800-522-7658