Labconco Protector 50600 User Manual page 56

Chapter 7: Accessorizing Your Glove Box
5. Electrical Power Strips
These convenience electrical power strips are available in US and
international versions and plug into the interior receptacle of the
glove box.
Part #
5211500
5210601
5290401
5332601
6. Electrical 9 Pin Sealed Pass-Through Kit (Part #5075619)
Includes sealed 9 pin (D-subminiature with male pins on one side and
female pins on the other) connector and cord for data transfer outside the
glove box. Typical data transfer includes oxygen/moisture levels or
analytical balance measurements to a printer.
7. Gas Inlet / Vacuum Outlet Tubing Kits and Direct Drive Vacuum Pumps
These flexible vinyl tubing kits provide the necessary tubing and fittings to
make connections to an inert gas supply tank and a rotary vane vacuum
pump. See Figures 3-4 and 3-7.
Part # Descriptions
5245100 Complete Gas/Vac Tubing Kit (Required)
5245200 Complete Gas/Vac Tubing Kit (Accessory)
1472100 Direct Drive Vacuum Pump, 115V, 50/60Hz
7739400 Direct Drive Vacuum Pump, 230V, 50/60Hz,
NEMA 6-15P plug
7739402 Direct Drive Vacuum Pump, 230V, 50/60Hz
with reverse IEC plug
8. AtmosPure Re-Gen Gas Purifiers (see catalog #'s below)
The AtmosPure Re-Gen Purifier produces an ultrapure inert atmosphere for
materials sensitive to moisture and/or oxygen by circulating an inert gas
and removing oxygen and moisture inside the box. Compatible with any
Protector or Precise Controlled Atmosphere Glove Box, the AtmosPure
allows the boxes to meet or exceed ISO 10648-2 test methods. The Purifier
has the capacity to remove up to five liters of oxygen (13,500 ppm) and
660 grams of moisture (18 million ppm) at standard temperature and
pressure (STP). Depending on the application, glove box liner material and
frequency of use, regeneration may be necessary only once every one to
three months and completed in only 13 hours. See Figure 1-1 in Chapter 1.
52
Descriptions
US Power Strip 115V, 4 Position, 10A
UK Power Strip 250V, 6 Position, 10A
European Power Strip 250V, 4 Position, 10A
Australian Power Strip 250V, 6 Position, 10A
Used With
Manual Valves, all Protector Glove Boxes
Auto Pressure Controller, accessory only
All Glove Boxes
All Glove Boxes, International Version
All Glove Boxes, International Version
Product Service 1-800-522-7658