Labconco Protector 50600 User Manual page 61

29. Left Side Door Option (Factory Prepared Only)
Any stainless steel glove box can be factory prepared with a large sealed
left side door for use in conveniently loading large equipment. With the
left side door option, the need to remove the front laminated safety glass
frame is eliminated. The left side door has an opening of 16.5" (419 mm)
wide x 23.2" (589 mm) high. Contact Labconco at time of order for the left
side door option.
30. Filtered Dry Glove Box Humidity Removal Kit (Part #5444500)
The Filtered Dry Glove Box Humidity Kit provides a means to reduce
humidity/moisture to 5-10% in 10-20 minutes and reduce oxygen to 2-10%
in 7-20 minutes. Humidity/moisture and oxygen can rapidly be reduced by
filling and purging the glove box with nitrogen or argon. Best results occur
with the blower setting set to OFF as the inert gas passes through to
exhaust filter and out through the blower. See Labconco 5444400
instruction sheet for performance charts on moisture and oxygen removal
levels.
Product Service 1-800-522-7658
Chapter 7: Accessorizing Your Glove Box
Figure 7-1
Left Side Door Option
57