Minolta MAGICOLOR 2350 User Manual page 36

A fill limit mark is provided on the
inside of the media guides on the
Tray 1. Tray 1 holds 200 sheets of
22 lb bond (80 g/m²) paper.
4
Slide the media guides up against the
edge of the media.
Attention
Always adjust the media guides after inserting the media. A guide that
is not properly adjusted can cause poor print quality, media jams, or
printer damage.
5
Set the media size and type at the control panel or in PageScope Light.
6
In the printer driver, select the appropriate media type and size.
7
Print the job.
Other Media
When loading media other than Plain Paper, set the media mode (for
example, Thick Stock, Label Stock, or Transparency) in the driver.
For optimum printing results it's important to specify the type and size
of media loaded into Tray 1. You can specify the media type through
your printer driver, through PageScope Light, or at the printer control
panel. Using your printer driver affects only your print jobs, while Pag-
eScope Light and the printer control panel affect all print jobs.
Envelopes
1
Flex the envelope stack (including the edges) to remove any stiffness.
34
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Loading Media