Minolta MAGICOLOR 2350 User Manual page 135

Symptom Cause
Language The Katakana
choices characters required
appear for the last language
wrong in choice are not
PageScope available in your
Light. system fonts.
You are using an old
version of NetScape
or Internet Explorer.
Your print job Custom media size
is not aligned doesn't match the
properly on a size identified in the
custom-sizep printer.
age.
Media is The media is moist
wrinkled. from humidity or
having water spilled
on the paper supply.
The transfer roller or
fuser unit may be
defective.
Unsupported media is
being used.
Multi-paged, The printer is not
legal-sized correctly optimized.
color
documents
print slowly.
Print Errors
occur when
printing PCL
files.
Errors occur
when printing
PDF files.
Solving Other Problems
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Solution
The default font needs to be set for MS
Gothic.
Make sure you are using Netscape 6.0
or later or Internet Explorer 5.0 or
newer.
Check that the Input Tray is set to
Custom at the control panel and that
the exact dimensions are entered in the
control panel menu, PageScope Light,
or the printer driver.
Remove the moist media and replace it
with new, dry media.
Check them for damage. If necessary,
contact Technical Support with the error
information. Refer to the Service &
Support Guide or
www.minolta-qms.com for support
telephone numbers.
Use MINOLTA-QMS-approved
media. Refer to chapter 2 for details.
Check www.minolta-qms.com/products/
for currently approved media.
In the System Default/Startup Options/
Optimize Media menu, choose For
Legal.
In the System Default/Startup Options/
Optimize PDL menu, choose For PCL.
In the System Default/Startup Options/
Optimize PDL menu, choose For PDF.
133