Table of Contents
Advertisement
3
Unhook the support wire.
4
Close the right-side door.
5
Open the duplex option's cover and
loosen the two thumbscrews until the
duplex option moves freely away from
the right side of the printer.
6
Lift duplex option up and away from the
printer.
7
Install the original right-side cover that
came with the printer with two screws.
8
Repack the duplex option in its original
shipping carton for storage or shipment.
If you're returning the printer for
service, you don't need to return the
duplex option, unless the problem is
with the duplex option.
Lower Feeder Unit
If you don't have a lower feeder unit installed, skip to the next section.
1
Slide tray 2 out of the printer and remove the media.
168
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Repacking the Printer
Advertisement
Table of Contents
Troubleshooting
