Minolta MAGICOLOR 2350 User Manual page 145

This message...
OPC DRUM LOW
OPC DRUM MISSING
OPC OUT
PAPER JAM
DUPLEX
PAPER JAM
EXIT
PAPER JAM
FUSER
PAPER JAM
TRANSFER
PAPER JAM
TRAY 1
PAPER JAM
TRAY 2
PAPER MISMATCH
PUT X
IN TRAY Y
REPLACE OPC
REPLACE OPC DRUM
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
means... do this...
The OPC drum will Make sure you have a
need to be replaced new OPC drum on hand.
soon.
The OPC drum is not Install the OPC drum.
installed.
The OPC drum needs Replace OPC drum and
to be replaced. waste toner bottle.
Media has jammed in Locate and remove the
the optional duplex jam.
unit.
Media has jammed Locate and remove the
between the print jam.
engine and the output
tray.
Media has jammed in Locate and remove the
the fuser unit. jam.
Media has jammed in Locate and remove the
the transfer area. jam.
Media has jammed Locate and remove the
while being pulled jam.
from the multipurpose
tray.
Media has jammed Locate and remove the
while being pulled jam.
from the optional
lower feeder unit.
The paper size set Check paper size
with the printer driver settings; load correct
is different from the size.
size of paper loaded.
The media tray "Y" Load more media.
(specified tray) is out
of media. Load media
size and type "X."
The OPC drum needs Replace OPC drum and
to be replaced. waste toner bottle.
The OPC drum needs Replace OPC drum and
to be replaced. waste toner bottle.
143