Table of Contents
Advertisement
2
If a misfeed occurs in the vertical
transport area, open the inner media
guide, and then pull the misfed media
down to remove it.
3
Close the inner media guide.
Fuser Unit Jams
WARNING!
The fuser unit is hot! Do not remove a jam in this area until the
fuser unit cools.
1
Lift up the two fuser unit levers.
When removing the jammed media,
be careful not to touch the transfer
belt. Touching the transfer belt may
result in decreased print quality.
122
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Clearing Media Jams
Advertisement
Table of Contents
Troubleshooting
