Table of Contents
Advertisement
2
Grasp the release lever for the OPC
drum cartridge, and then pull the
cartridge straight out about 6 inches
(152 mm).
3
Support the bottom of the drum with
your hand, then carefully pull the
cartridge toward you and remove it.
Dispose of the cartridge
properly according to your
local regulations.
Installing the New OPC Drum Cartridge
Attention
The OPC drum is extremely sensitive to bright light and direct sunlight.
Always leave it in its protective bag until you are ready to install it. Any
exposure to light should be avoided, or permanent damage could
result.
Any damage resulting from mishandling of the OPC drum will void the
drum's warranty. Also, handle the cartridge carefully by its sides so you
don't touch the surface (the green part) of the drum. The drum is also
extremely sensitive to hand oils and scratches, both of which reduce
print quality.
98
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Replacing Consumables
Advertisement
Table of Contents
Troubleshooting
