Antistatic Protection; Dual In-Line Memory Module (Dimm) - Minolta MAGICOLOR 2350 User Manual

Antistatic Protection

Attention
It's very important to protect the printer controller board and any
associated daughterboard or module from electrostatic damage
while performing any task involving the controller board.
If an antistatic wrist strap is provided in your printer option kit,
attach one end of it to your wrist and the other end to the bare metal
chassis on the back of your printer. Never attach the wrist strap to
any piece of equipment with an electrical current present. Turn off all
power switches first. Plastic, rubber, wood, painted metal surfaces,
and telephones are not acceptable grounding points.
If you don't have an antistatic wrist strap, discharge your body's
static electric charge by touching a grounded surface before you
handle any printer boards or components and before removing the
controller board. Also avoid walking around after grounding
yourself.

Dual In-Line Memory Module (DIMM)

Dual in-line memory modules (or DIMMs) are compact circuit boards with
surface-mount memory chips.
Your printer comes with 128 MB SDRAM printer memory. However, you can
upgrade to a maximum of 384 MB of RAM through the installation of an
additional DIMM. Additional memory must be 64, 128, or 256 MB, PC-100- or
PC-133-Compliant SDRAM DIMM.
You will need additional memory (DIMM) to duplex print at high
resolution or to print legal size pages at high resolution. Additional
memory may also improve printer performance.
How Much Memory Do You Need?
The amount of memory installed in your printer governs which resolutions can
be used with each media size.
If you select a resolution but do not have enough memory installed, the file
will print with the next highest resolution for which there is enough memory.
For example, if you attempt to print a duplex job with 4-color graphics at Post
Script High or PCL Enhanced resolution on legal media, but the printer has
only 128 MB of RAM installed, the file prints at Standard resolution.
Antistatic Protection
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
149