Table of Contents
Advertisement
d Open the duplex option's cover
and tighten the two thumbscrews
that came with the duplex option
to secure the unit to the printer.
e
Close the duplex option's cover.
6
Attach the support wire for the
duplex option to the printer.
a Pull the right-side door release
lever and open the right-side
door.
If you have a lower feeder unit
attached, you will first need to
open the lower right-side door.
b Pull the tab for the support wire
on the right side of the duplex
option, and then hook the wire
onto the hook of the printer.
c
Close the right-side door.
7
Reconnect interface cable.
Duplex Option
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
155
Advertisement
Table of Contents
Troubleshooting
