Minolta MAGICOLOR 2350 User Manual page 188

Fonts 137 PostScript fonts
90 PCL fonts
Standard Ethernet—10BaseT/100BaseTX
interfaces
Parallel—Centronics/IEEE 1284 bidirectional
USB—USB (version 1.1) Type B connector
RAM Type: PC-100- or PC-133-Compliant SDRAM DIMMs
Base system RAM: 128 MB
Total RAM: Upgradable to 384 MB
Optional RAM 128 and 256 MB DIMMs
Optional Hard Type: IDE
Disk
Disk Drive Type: PIO Mode 4 compatible
Size: 6 GB or larger
System Upgradable via FLASH.
software
186
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
(plus 115 of the same fonts re-encoded for use in
Central Europe and 3 re-encoded for ISOLatin1)
(80 scalable and 10 bitmap)
For information about DIMMs recommended for
your printer, see the magicolor 2350 Answer Base
through the Internet at www.minolta-qms.com/
support/ or contact Technical Support.
Check the magicolor 2350 Answer Base through the
Internet at www.minolta-qms.com/support/ for
information about the latest system software
version.
Engine and Controller Specifications