Lazer Safe PCSS-A Series Technical Manual page 6

PCSS-A Series Technical Manual
Date Manual
Version
10/04/2019 1.15
4/06/2019 1.16
03/06/2020 1.17
29/06/2021 1.18
Page iv
Original Language Version: 1.25
Software Summary of Change
Version
Ax2.22.00 Updated Kernel Software Interface ANO2-15, DO1-82,83.
Added Emergency Stop Options 23,24 (reserved).
Added BLR-XL to Kernel Software Interface DO1-66.
Updated Declaration of Conformity.
Ax2.23.00 Updated Kernel Software Interface DI1-56,57; DO1-84,85,86; ANO2-26.
Added Down Enable Attribute Bit 8, Down Switch Attribute Bit 2.
Added Down Enable Option 36, Valve Monitoring Option 34, E-Stop Option
25.
Correction to Figure 11-5.
Updated Down Enable Option 35 connections and operation description.
Updated for new laser guard model numbers; LZS-1, LZS-2, LZS-2-FG and
LZS-XL. Removed references to LZS-005.
Added Expansion Bus port description.
Added Guard/Counter Operation Option Bit 28 and 29.
Updated Table 9-1.
General corrections.
Updated copyright notice.
Updated Declaration of Conformity.
Ax2.24.00 Updated copyright information.
Corrected note reference for Dual Output Specifications in Section 4.4.
Added note regarding UL General Safety compliance in Section 2,
Introduction.
Added notes for CN2, main power external fuse UL compliance.
Added requirement for indoor use, Enclosure Mounting, enclosure ratings in
Specifications.
Corrected description for Bit 1 in Table 14-1.
Added Bit 9 description in table 7-10 (robot mode options).
Updated Kernel Software Interface DI1-58,87,88; DO1-87,88,89,90,91; ANI-
21,22; ANO2-25,26,27.
Added Down Switch Attribute Bit 3.
Added Down Enable Option 37.
Removed references to expansion port HWI lines.
Updated Declaration of Conformity.
Ax2.25.00 Updated copyright information.
Updated encoder connection diagrams Figure 5-14 to 5-17.
Added start-up test descriptions to Down Enable Safety Function options.
Added PCSS-A0 connection diagram for Down Enable Option 26.
Updated description and timing diagram for high speed solenoid in Down
Enable Option 26.
Updated DE hardware compatibility table. PCSS-A0 added DE 4,6,12,26;
removed DE 9,10,20. PCSS-A1/A2 added DE 12.
Updated DE Options 15, 23 with turn on delay options.
Updated DE Options 4, 15, 23 with turn off delay options.
Added Down Enable Attribute Bit 9 for DE 7 and 10.
Added Down Enable Option 38.
Added Down Switch Options 6,9,10, updated operator mode selection.
Updated CNC Press Controller Communications Interface.
Updated Kernel Software Interface DI1-52; DO1-65,89,90,92; ANO-23,25;
ANO2-20.
Added Automatic Cycle Start to IRIS/IRIS Plus Specific Operation.
Added Guard/Counter Operation Options 24,31.
Removed LCD Remote Panel Communications section.
Added CANOpen Communications section.
Added counter shielding/earthing Figure 5-13.
Updated Down Switch Safety Function overview.
Added Section 17.6.9 Step Bending Mode.
Updated Declaration of Conformity.
LS-CS-M-046
Released: 12/09/2024