Lazer Safe PCSS-A Series Technical Manual page 5

LS-CS-M-046
Date Manual
Version
20/03/2015 1.08
17/04/2015 1.09
21/03/2016 1.10
16/09/2016 1.11
17/01/2017 1.12
22/11/2017 1.13
23/01/2018 1.14
Original Language Version: 1.25
Software Summary of Change
Version
Ax2.10.00 (continued) Added Emergency Stop Option 19
Added notes for material sensing in Section 17.
Updated kernel software interface.
Ax2.12.01 Corrected special mode disparity codes
Updated Kernel Software Interface (DI1-51, DO1-51, ANO2-10,11)
Added Down Enable attribute bit 7
Added CNC Communications Interface Serial Modbus ASCII Channels An-In
32-33
Updated Declaration of Conformity
Ax2.14.00 Updated Kernel Software Interface to ker__e3, ANI complex equipment
channels 18-31. Added ANI-18, slow speed opening point from kernel.
Added conditions for repeating start-up tests during normal operation.
Corrected operation of level limit e-stop Option 1 and 3.
Added note for mute point confirmation and expected slow speed.
Corrected E-Stop Option 10, Y01 references changed to Y05.
Corrected reference to Section 17.8, changed to 17.9.
Updated Kernel Software Interface (DI1-52,53,54,55; DO1-
52,53,54,55,56,57,58;
ANI-19; ANO2-12).
Updated Declaration of Conformity.
Ax2.15.00 Added description of valve monitoring timeout values ANO2-21,22.
Updated Kernel Software Interface ANO2-13.
Added E-Stop Options 21,22.
Added Valve Monitoring Attribute Bit 2.
Modified description of Down Enable Attribute Bit 1.
Added Down Switch Option 10.
Added Guard/Counter Operation Option Bits 22-26.
Added extruded case dimensions, mounting.
Added description of COM1, COM2 serial ports.
Replaced references to LZS-005 with more generic block laser terms where
appropriate.
Updated Declaration of Conformity.
Ax2.16.00 Added contrast adjustment.
Updated Kernel Software Interface DO1-64,65,66; ANO2-14.
Updated VCP serial port driver links.
Added description of COM1 – COM4 ISaGRAF 3.46 limitation.
Corrected rear door switch for E-Stop 21, 22.
Corrected reference to Clause 5.1.1.5 in Special Tools.
Added Valve Monitoring Option 31.
Added description of up-stand height.
Added DIN rail mounting option.
Ax2.17.00 Updated scrolling display fast/stop control.
Updated Kernel Software Interface DO1-37,43,67.
Added Guard/Counter Operation Option Bit 27.
Updated tandem interface variable names/descriptions.
Updated Declaration of Conformity.
Ax2.21.00 Updated Kernel Software Interface ANI-20, DO1-68, ANO2-18.
Corrected ANO2-8.
Added Guard/Counter Operation Option Bit 28 (reserved).
Corrected incorrect channel number in Section 10.6.14 for percentage value.
Added speed monitoring deceleration ramp diagram.
Added SmartLink Brackets, DO1-69, 70, 71,72,73,74,75,76,77,78,79,80,81.
Added Down Enable Options 34,35, Valve Monitoring Options 32,33.
Added description of Tray mode with alternate upstand operation.
General corrections.
Updated Declaration of Conformity.
PCSS-A Series Technical Manual
Page iii
Released: 12/09/2024