Advertisement
LS-CS-M-046
1
About This Manual
This section contains information about this manual. It contains the following sections:
•
Document Objectives
•
Technical Competence Requirements
•
Prerequisites
•
Document Organisation
•
Related Documentation
•
Guides to Notes, Cautions and Warnings
•
Obtaining Technical Assistance
1.1
Document Objectives
The Lazer Safe PCSS-A Series Technical Manual provides comprehensive information on
the Lazer Safe PCSS-A Series Safety and Control System.
1.2
Technical Competence Requirements
This manual provides information on the configuration and use of Lazer Safe's PCSS-A0,
PCSS-A0 Plus, PCSS-A1 and PCSS-A2 press brake safety and control systems. This
manual has been written for the use of trained and competent personnel as defined below.
•
Any engineer who is responsible for the planning, design and construction of automatic
equipment using the PCSS should be of a competent nature, trained to and qualified in
all relevant local and national standards required to fulfil that role. Such engineers
should be fully conversant in all aspects of safety with regards to automatic equipment.
•
Any commissioning or service engineer must be of a competent nature, trained to and
qualified in all relevant local and national standards required to fulfil that role. Such
engineers should also be trained in the use and maintenance of the completed product,
including being completely familiar with all associated documentation. All maintenance
should be carried out in accordance with established safety practices.
•
All operators of the installed equipment should be trained to use it in a manner that
complies with established safety practices. Operators should also be familiar with all
documentation concerning operation of the equipment.
1.3
Prerequisites
To use Lazer Safe PCSS-A Series Technical Manual, you should be fully conversant with
all critical safety aspects of the PCSS-A Series models and the press brake upon which it is
to be installed.
1.4
Document Organisation
This manual is organised into the following chapters:
1. About This Manual
2. Introduction
3. PCSS-A Series Hardware
4. I/O Interface
5. Guard and Counter Interface
6. Communications Connections
7. PCSS Kernel Software Interface
8. CNC Press Controller Communications Interface
Original Language Version: 1.25
PCSS-A Series Technical Manual
Page 1
Released: 12/09/2024
Advertisement
Need help?
Do you have a question about the PCSS-A Series and is the answer not in the manual?