Sartorius Entris II Advanced Series Operating Instructions Manual page 46

Decommissioning
11 Decommissioning
11.1 Decommissioning the Device
Procedure
Turn the device off.
t
Disconnect the device from the power supply.
t
Disconnect the device from all connected devices
t
and all accessories, e.g. printer.
Clean the device (see Chapter 9.2, page 42).
t
12 Storage and Shipping
12.1 Storage
Procedure
Turn the device off.
t
Disconnect the device from the power supply.
t
Disconnect the device from all connected devices,
t
e.g. printer.
Store the device according to the ambient conditions
t
(see Chapter 14.1, page 47).
12.2 Returning the Device and Parts
Defective devices or parts can be sent back to Sartorius.
Returned devices must be clean, decontaminated, and
properly packed.
Transport damage as well as measures for subsequent
cleaning and disinfection of the device or parts by
Sartorius shall be charged to sender.
Devices contaminated with hazardous materials, e.g.
harmful biological or chemical substances, will not be
accepted for repair or disposal. The devices must be
decontaminated before shipping (for decontamination,
see Chapter "13.1 Decontaminating the Device",
page 46).
Procedure
Turn the device off.
t
Disconnect the device from the power supply.
t
Contact Sartorius Service for instructions on how to
t
return devices or parts (please refer to
www.sartorius.com).
Pack the device and its parts properly for return, e.g.
t
in their original packaging.
46 Entris II Advanced Line Operating Instructions
®
13 Disposal
13.1 Decontaminating the Device
The device does not contain any hazardous materials
that necessitate special disposal measures. If the device
has come into contact with hazardous substances: Steps
must be taken to ensure proper decontamination and
declaration.
Procedure
If the device has come into contact with hazardous
t
substances: Decontaminate the device. The operator
of the device is responsible for adhering to local
government regulations on the proper
decontamination and declaration for transport and
disposal.
13.2 Disposing of Device and Parts
The device and the device accessories must be disposed
of properly by disposal facilities.
A lithium cell battery, type CR2032, is installed inside
the device. Batteries must be disposed of properly by
disposal facilities.
The packaging is made of environmentally friendly
materials that can be used as secondary raw materials.
Requirements
The device has been decontaminated.
Procedure
Dispose of the device. Follow the disposal
t
instructions on our website (www.sartorius.com).
Inform the disposal facility that there is a lithium cell
t
battery, type CR2032, installed inside the device.
Dispose of the packaging in accordance with local
t
government regulations.