Sartorius Entris II Advanced Series Operating Instructions Manual page 33

Parameters of the "Pipette Test" Application
Parameters Settings
Print On*
component
Off
Apply Automatic
Manual*
* Factory setting
4.11.19 Unit Toggling Parameters "Unit / Accuracy"
Parameters Settings
Unit g*, kg, ct,
lb,oz, ozt, tlh,
tlt, GN, dwt,
mg, /lb, tlc,
mom, Kt, tol,
bat, MS, N
Accuracy All digits on
Last digit off
* Factory setting
Explanation
Activates the component printout.
Deactivates the component printout.
Automatically saves the weight value.
Saves the weight value after manual confirmation.
Explanation
Defines the unit of the weight value.
Shows all available decimal places.
Does not show the last available decimal place.
Operating Concept
Entris II Advanced Line Operating Instructions
®
33