Sartorius Entris II Advanced Series Operating Instructions Manual page 42

Cleaning and Maintenance
9 Cleaning and
Maintenance
9.1 Detaching the Frame Draft
Shield and Weighing Pan
Requirements
The device is disconnected from the power supply.
Procedure
9.2 Cleaning the Device
Procedure
Disconnect the device from the power supply.
t
Only use suitable cleaning agents and cleaning
t
procedures and observe the product information for
the cleaning agent used (for cleaning agent, see
Chapter "14.7 Cleaning Agent", page 49).
Remove dust and powdery sample residue with a
t
brush or hand-held vacuum cleaner.
Wipe the device and the associated components
t
with a slightly damp cloth. Use a mild soapy solution
or a suitable cleaning agent for more severe
contamination.
42 Entris II Advanced Line Operating Instructions
®
Remove the
t
1
weighing pan (1),
the four shock
2
absorbers (2), and
3
the frame draft
shield (3).
9.3 Attaching the Frame Draft
Shield and Weighing Pan
Procedure
Put the frame draft shield, the four shock absorbers,
t
and the weighing pan into place.
Connect the device to the power supply (see
t
Chapter 6.2, page 36).
9.4 Maintenance Schedule
Interval Component
Regularly; Device
depending on
the operating
conditions
9.5 Software Update
For a software update, contact Sartorius Service.
Action
Perform a functional
test of the device.
Contact Sartorius
Service for this.