Sartorius Entris II Advanced Series Operating Instructions Manual page 25

4.11.8 Parameters in the "Settings / Printout / Automatic Print" Menu
Parameters Settings
Auto print Standard
interval
Interval time*
Interval time
Auto print Value*
format
Date, Value
* Factory setting
4.11.9 Parameters in the "Settings / Printout / ID" Menu
Parameters Settings
Set device ID
Set additional
ID
Batch ID On
function
Off*
Batch ID2 On
function
Off*
Sample ID On
function
Autom.
increment
Autom.
decrement
Off*
Sample ID2 On
function
Autom.
increment
Autom.
decrement
Off*
* Factory setting
Explanation
Model-specific output rate for weight determination < 1 s.
The interval time is used as the output rate.
Defines the interval time.
Prints the weight value.
Prints the weight value and a time stamp.
Explanation
Defines an ID number for the device.
Sets an additional ID number for the device.
Activates the output of the batch ID number in the ISO / GLP printout.
Deactivates the output of the batch ID number in the ISO / GLP printout.
Activates the output of the batch ID2 number in the ISO / GLP printout.
Deactivates the output of the batch ID2 number in the ISO / GLP printout.
− Activates the sample ID.
− The sample ID is queried before each printout.
Counts up the sample ID automatically.
Counts down the sample ID automatically.
Deactivates the sample ID.
− Activates the sample ID2.
− The sample ID is queried before each printout.
Counts up the sample ID2 automatically.
Counts down the sample ID2 automatically.
Deactivates the sample ID2.
Operating Concept
Entris II Advanced Line Operating Instructions
®
25