Sartorius Entris II Advanced Series Operating Instructions Manual page 36

Getting Started
6 Getting Started
6.1 Installing the Power Supply
Unit
6.1.1 Assembling the Power Supply Unit
Item number on Power supply unit YEPS01-15VOW
packaging with connection cable and country-
specific power plug adapters
(packed in PE bag with printed
country identification, e .g . EU)
YEPS01-PS8 USA and Japan (US+JP), Europe and
Russia (EU+RU), Great Britain (UK),
India (IN), South Africa (ZA),
Australia (AU), China (CN)
YEPS01-PS9 Argentina (AR), Brazil (BR),
Korea (KR)
YEPS01-PS10 China (CN)
Procedure
Push the power plug adapter as far as you can until it
t
clicks into place.
Check whether the power plug adapter is securely
t
locked in place by pulling it gently.
If the power plug adapter does not move: It is locked
y
in place.
36 Entris II Advanced Line Operating Instructions
®
Select the country-specific
t
power plug adapter. The
power plug adapter must
be suitable for use with the
wall outlet at the
installation site.
Insert the power plug
t
adapter into the power
supply unit. The grooved
button must be facing
upwards.
6.1.2 Dismantling the Power Plug Adapter
Procedure
6.2 Connecting the Power Supply
Procedure
WARNING Severe injuries caused by using
t
defective power supply cables! Check the power
supply cable for damage, e.g., cracks in the insulation.
If required: Contact Sartorius Service.
t
Check whether the country-specific power plug
t
matches the power connections at the installation
site.
If required: Replace the country-specific power
t
plug adapter.
NOTICE Damage to the device due to excessive
t
input voltage! Check whether the voltage
specifications on the manufacturer's ID label match
those of the power supply at the installation site.
If the input voltage is too high: Do not connect
t
the device to the power supply.
Contact Sartorius Service.
t
Connect the plug to the "Power Supply" connection.
t
Connect the mains plug to the wall outlet (mains
t
voltage) at the installation site.
Press the grooved button
t
from above and pull back
on the power plug adapter.
Push the power plug
t
adapter out of the power
supply unit and remove it.