Operating Concept
Parameters
Settings
Instability
Start
Automatic
Manual*
* Factory setting
Parameters of the "Checkweighing" Application
Parameters
Settings
Min
Max
* Factory setting
Parameters of the "Peak hold" Application
Parameters
Settings
Apply
At stability*
Without
stability
* Factory setting
Parameters of the "Counting" Application
Parameters
Settings
Reference
Accuracy
Normal*
10-fold
Optimize
Automatic*
Off
* Factory setting
32
Entris
II Advanced Line Operating Instructions
®
Explanation
Sets the intensity of the "Animal activity" to "very active". Recommended for very
active movements of the sample.
Sets the intensity of the "Animal activity" to "medium". Recommended for
medium movements of the sample.*
Sets the intensity of the "Animal activity" to "calm". Recommended for minor
movements of the sample.
Sets the trigger to start the "Animal weighing" application to "automatic".
The "Animal weighing" application must be manually selected in the start screen.
Explanation
Defines the lower limit (minimum).
Defines the upper limit (maximum).
Explanation
Peak holds are applied when there is stability.
Peak holds are applied without stability.
Explanation
Defines the number of reference pieces.
Activates the automatic reference sample updating. The average piece weight is
recalculated every time the reference sample is updated automatically. The basis
for the calculation is increased every time a new sample is placed. This increases
the counting accuracy of the reference and with it the result.
Deactivates automatic reference sample updating.
Need help?
Do you have a question about the Entris II Advanced Series and is the answer not in the manual?
Questions and answers