Sartorius Entris II Advanced Series Operating Instructions Manual page 26

Operating Concept
4.11.10 Parameters in the "Settings / SBI Protocol" Menu
Parameters Settings
SBI function Manual
without
stability
Manual with
stability*
Auto without
stability
Auto without
stability
Print after
weight
change
Manual print Value w/o
format identifier
Value*
Date, Value
Value (N, T,
G#)
Date, Value
(N, T, G#)
* Factory setting
4.11.11 Parameters in the "Settings / SBI Protocol / Automatic Print" Menu
Parameters Settings
Cancel auto With Print
printing key or ESC P
Off
Auto print Standard
interval
Every 2
display
updates
Interval time*
Interval time
Auto print Value w/o ID
format
Value*
Date, Value
* Factory setting
26 Entris II Advanced Line Operating Instructions
®
Explanation
If a print command is given, e.g., via the [print] button: The weight value is
printed.
If a print command is given, e.g., via the [print] button: The weight value not is
printed until the device is stable.
Prints the weight value automatically without device stability.
Prints the weight value automatically only when the device is stable.
Prints after a threshold for device stability has been exceeded and the weight
has previously been reduced to less than half of the threshold.
Prints the weight value without labeling, e.g., "Net" or "G".
Prints the weight value.
Prints the weight value and a time stamp.
Prints a weight value block (net, tare, calculated gross).
Prints a time stamp and a weight value block (net, tare, calculated gross value).
Explanation
If the "PRINT" or "ESC P" key is pressed: Automatic printout is canceled.
Automatic printout cannot be canceled.
Model-specific output rate for weight determination < 1 s.
Prints every 2nd value of standard.
The interval time is used as the output rate.
Defines the interval time.
Prints the weight value without labeling, e.g., "Net" or "G".
Prints the weight value.
Prints the weight value and a time stamp.