Sartorius Entris II Advanced Series Operating Instructions Manual page 14

Operating Concept
4.7 Buttons
Symbol Name
[On/Off] button
[Zero] button
[Tare] button
[Print] button
[Menu] button
[isoCAL] button
[Leveling]
button
[Start leveling]
button
[Ambient
condition]
button
[Application
filter] button
[Toggle between
weight units]
button
[Invalid weight
value] button
[Exit GLP]
button
[Start GLP]
button
[Apply] button
[Start] button
14 Entris II Advanced Line Operating Instructions
®
Description
− When the button is pressed: Switches the operating display on.
− If the button is held down: Switches the operating display to standby mode.
Zeroes the device.
Starts taring.
Exports the readouts to the integrated data interfaces.
Opens the main menu.
− If the button is highlighted orange: Indicates that the device needs to be
calibrated and adjusted.
− Starts the isoCAL function.
− Indicates that the device is leveled.
− In the main menu: Opens the Leveling Wizard.
− Indicates that the device needs to be leveled.
− Starts the Leveling Wizard.
Switches between the ambient conditions "v. stable", "stable", "unstable", and
"v. unstable".
Switches between the "weighing" and "dosing" application filters.
− Once the weight value is stable: Indicates the set weight unit, e.g., [g] for
"grams".
− When the button is pressed: Opens the settings for toggling between weight
units and for accuracy.
− For conformity-assessed models only.
− Indicates that the weight value is invalid.
− When the button is pressed: Opens a message for rectifying the problem,
e.g., that the device needs to be leveled.
Exits the GLP printout and starts printing the GLP footer.
− Starts the GLP printout and starts printing the GLP header.
− Prints the defined batch and/or sample ID.
Adopts the next component or the next weight value.
Starts an application.