Saving Sample Sets You've Created (Write) - Roland Fantom G8 User Manual

Creating a Sample Set
Saving Sample Sets You've
Created (Write)
Changes you make to sound settings are temporary, and will be lost
if you turn off the power or select another sound. If you want to keep
the modified sound, you must save it in the user bank.
When you edit the sample set settings, the "
in the Single Play screen. When you save the sample set, the "
symbol will disappear.
When you perform the save procedure, the data that previously
occupied the save destination will be lost.
1.
Make sure that the Sample Set you wish to save is selected.
2.
Press [WRITE].
The WRITE MENU window appears.
3.
Select "Patch / Rhythm / Sample Set."
Press or to select "Patch / Rhythm / Sample Set," and
then press [F8 (Select)].
The Sample Set Name window appears.
fig.07-006_50
4.
Assign a name to the sample set.
For details on assigning names, refer to "Assigning a Name"
(p. 42)
5.
When you have finished inputting the name, press [F8
(OK)].
A screen will appear, allowing you to select the write-
destination sample set.
128
6.
7.
" symbol will appear
8.
"
Turn the VALUE dial or use [INC] [DEC] to select the sample
set number.
Press [F8 (Write)].
A message will ask you for confirmation.
Never switch off the Fantom-G while data is being saved.
Press [F7 (OK)] to execute the save operation.
To cancel, press [F8 (EXIT)].