Input Effect Parameters - Roland Fantom G8 User Manual

Effects List

Input Effect Parameters

Selects the type of effect that will be applied to the external input
source.
01: EQUALIZER
Adjusts the tone of the low-frequency and high-frequency ranges.
Parameter Range
Low Freq 200, 400 Hz
Low Gain -15– +15 dB
High Freq 2000, 4000, 8000 Hz
High Gain -15– +15 dB
02: ENHANCER
Modifies the harmonic content of the high-frequency range to add
sparkle to the sound.
Parameter Range
Sens 0–127
Mix 0–127
03: COMPRESSOR
Restrains high levels and boosts low levels to make the overall
volume more consistent.
Parameter Range
Attack 0–127
Threshold 0–127
Post Gain 0– +18 dB
04: LIMITER
Compresses the sound when it exceeds a specified volume, to keep
distortion from occurring.
Parameter Range
Release 0–127
Threshold 0–127
Post Gain 0– +18 dB
186
Explanation
Center frequency of the low-fre-
quency range
Amount of low-frequency
boost/cut
Center frequency of the high-
frequency range
Amount of high-frequency
boost/cut
Explanation
Depth of the enhancer effect
Volume of the harmonics that
are generated
Explanation
Time from when the input ex-
ceeds the Threshold until the
volume begins to be com-
pressed
Volume level at which compres-
sion will begin
Level of the output sound
Explanation
Time from when the input falls
below the Threshold until com-
pression ceases
Volume level at which compres-
sion will begin
Level of the output sound
05: NOISE SUPPRESSOR
Suppresses noise during periods of silence.
Parameter Range
Threshold 0–127
Release 0–127
06: CENTER CANCELER
Removes the sounds that are localized at the center of the stereo
input. This is a convenient way to eliminate a vocal.
Parameter Range
Ch Balance -50– +50
Range Low 16–15000 Hz
Range High 16–15000 Hz1
Explanation
Volume at which noise suppres-
sion will begin
Time from when noise suppres-
sion begins until the volume
reaches zero.
Explanation
Volume balance of the L (left)
and R (right) channels for re-
moving the sound
Lower frequency limit of the
band to be removed
Upper frequency limit of the
band to be removed