Accessing The Mixer Screen; Changing The Playback Tempo Of The Song - Roland Fantom G8 User Manual

Accessing the Mixer Screen

For a song you've created in Studio mode, you can use the Studio
mode Studio Play screen to adjust the volume of each internal sound
generator part and audio track.
For details on operation, refer to "Displaying Studio Play
Screen" (p. 66).
Playing Back a Song
Changing the Playback Tempo of
the Song
When a song plays back, its tempo is determined by the data in the
tempo track, but you can also adjust the tempo of the overall song
during playback. This adjustment is called the "playback tempo."
The playback tempo is a temporary setting. It will be lost when
you switch to a different song or turn off the power. If you want
the song to always play at this tempo, you must re-save the
song (p. 254).
The tempo is stored on an individual Live/Studio Set basis.
Using "Tempo Assign Source" (p. 296), you can choose to
have the tempo follow the setting of each Live/Studio Set
(TEMP), or follow the Fantom-G's global settings (SYS).
1.
Press [TEMPO].
The Tempo window will appear.
fig.17-004_50
2.
Turn the VALUE dial or use [INC] [DEC] to specify the
playback tempo. By holding down [SHIFT] and turning the
VALUE dial you can make fine adjustments below the
decimal point.
• If you press [F7 (Click)] to turn it on, a click will sound at the
specified tempo. The click will turn on/off each time you press
the button.
• You can specify the tempo by pressing [F6 (Tap Tempo)] at the
desired interval (Tap Tempo). Press the button at least three
times at quarter-note intervals of the desired playback tempo.
3.
When you've finished making settings, press [F8 (Close)].
207