Placing The Fantom-G On A Stand - Roland Fantom G8 User Manual

Placing the Fantom-G on a Stand

* Be careful not to pinch your fingers when setting up the stand.
For Fantom-G6/G7 user
If you want to place the Fantom-G6/G7 on a stand, use the Roland KS-18Z.
Place the instrument on the stand as follows.
fig.02-001.e
KS-18Z
Align the front of the
Fantom-G6/G7
with the front of
the stand
WARNING:
Use of stand not according to the instructions above will result in instability causing
possible injury.
For Fantom-G8 user
If you want to place the Fantom-G8 on a stand, use the Roland KS-18Z or KS-G8.
Place the instrument on the stand as follows.
fig.02-001.e
KS-18Z
KS-G8
Align the screws
of the Fantom-G8
with the front of
the stand
WARNING:
Use of stand not according to the instructions above will result in instability causing
possible injury.
Adjust so that the
height does not
exceed 1 meter
(Adjust the stand
to a level no
higher than the
fourth level from
the bottom)
Align the back of
the Fantom-G8 with
the back of the stand
Making Connections
Adjust the width of the stand so that
the rubber feet of the Fantom-G6/G7
straddle the stand
Top view
Adjust the width of the stand so that
the rubber feet of the Fantom-G8
are on the inside of the stand
Top view
Place the Fantom-G8 so
that it's rubber feet are in the
inner side of the stand
Top view
27