Keyboard; Dynamic Pad - Roland Fantom G8 User Manual

System Settings (Settings Common to All Modes)

Keyboard

Keyboard Velocity
Specifies the velocity value that will be transmitted when you play
the keyboard. If you want actual keyboard velocity to be
transmitted, set this to "REAL." If you want a fixed velocity value to
be transmitted regardless of how you play, specify the desired value
(1–127).
Value: REAL, 1–127
Keyboard Velocity Curve
Adjusts the keyboard's touch.
Value
LIGHT: Light weight synthesizer keyboard like
MEDIUM: Standard
HEAVY: Acoustic piano simulation
Keyboard Velocity Sens
(Keyboard Velocity Sensitivity)
Adjusts the sensitivity of the keyboard. As you increase this setting,
higher velocity values will be transmitted according to the force with
which you play. Normally you will leave this set at "0."
Value: -63– +63
Aftertouch Sens (Aftertouch Sensitivity)
Specifies the Aftertouch sensitivity. Higher values will allow
Aftertouch to be applied more easily. Normally you will leave this at
"100."
Value: 0–100

Dynamic Pad

Pad Assign Source
Specifies whether changes in pad mode will follow the system's Pad
Mode setting (SYS) or follow the live set or studio set (TEMP).
Value: SYS, TEMP
Pad Velocity
For all sixteen pads, this specifies the velocity (loudness) that is
produced when you strike a pad. With the "REAL" setting, you'll be
able to produce dynamics by varying your striking force. With a
setting of "1–127," the pads will produce the specified velocity value
regardless of your actual striking force.
Value: REAL, 1-127
Pad Sens (Pad Sensitivity)
Specifies the relation between your striking force and the velocity
that is produced.
Value
LIGHT: It will be easy to produce the maximum velocity
without having to strike very hard.
MEDIUM: This is the standard pad sensitivity setting.
HEAVY: You will have to strike quite strongly to produce the
maximum velocity.
292
Pad Aftertouch Sens
(Pad Aftertouch Sensitivity)
"Aftertouch" means additional pressure that you apply on a pad
after striking it. This setting adjusts the aftertouch sensitivity. Higher
values make it easier to apply aftertouch. Normally you will leave
this at a setting of "100."
Value: 0-100
Pad Roll Resolution
Specifies the speed of repeated strikes when using the pads to play
rolls.
Values: , , , ,
Pad Mode
Specifies the pad mode (p. 188) when the Fantom-G starts up (when
a project is loaded).
Value: SAMPLE PAD, RHYTHM, CHORD MEMORY,
ARPEGGIO, RPS, RHYTHM PTN, TONE SEL/SW,
TRACK MUTE, BOOKMARK, MIDI TX SW,
EFFECT SW, PATCH MFX SW, PART SELECT,
PART MUTE, USER GROUP, FAVORITE
RPS Set Assign Source
You can specify whether the RPS Set Number will follow the setting
of each Live / Studio Set (TEMP) or the setting for the entire Fantom-
G (SYS).
Value
TEMP: Use the RPS Set Number of each Live / Studio Set
SYS: Use the Fantom-G's global settings
Rhythm Pattern Set Assign Source
You can specify whether the Rhythm Pattern Set Number will follow
the setting of each Live / Studio Set (TEMP) or the setting for the
entire Fantom-G (SYS).
Value
TEMP: Use the Rhythm Pattern Set Number of each Live /
Studio Set
SYS: Use the Fantom-G's global settings
, , ,