Displaying Sample Edit Screen (Sample Edit); Magnifying/Shrinking The Waveform Display (Zoom) - Roland Fantom G8 User Manual

Editing a Sample
Displaying Sample Edit Screen
(Sample Edit)
1.
Press [SAMPLE].
The Sample Edit screen will appear.
fig.14-007_50
Samples that you edit will be lost when you turn off the power.
If you want to keep them, you must Save them (p. 274).
F-key operations in the Sample Edit screen
F-key Explanation
F1 Shows the sample list.
Sample List
F2 Displays the Sample Parameter screen,
Param where you can make various settings for
the sample.
F3 Truncate
Modify
Emphasis
Normalize
Amp
Time Stretch
Chop
F4 Specifies the start/end point of the sample
in units of a beat.
Beat
F5 Specifies the start/end point of the sample
in units of a beat.
Beat
F6 Zooms the waveform display.
Zoom
F7 Auditions the selected sample.
Preview
F8 Returns to the previous screen.
Exit
Parameters in the Sample Edit screen
Parameter Explanation
Start Point The point at which playback will start.
Loop Start The point at which loop playback (second
time and onwards) will start.
End Point The point at which playback will end.
Zoom Horz The magnification (horizontal axis) of the
display.
Zoom Vert The magnification (vertical axis) of the dis-
play.
Original Note number that will play the sample at
Key the pitch at which it was sampled.
BPM Specifies the original tempo of the sample.
Sample Adjusts the gain of the sample.
Gain
266
Page
p. 263
p. 268
Cuts an unwanted por- p. 269
tion
Boosts/limits the high p. 269
frequency range
Maximizes the volume p. 270
Applies a volume enve- p. 270
lope
Stretches/shrinks the p. 271
sample
Divides the sample p. 272
p. 267
p. 267
p. 266
–
–
Page
p. 267
p. 267
p. 267
p. 266
p. 266
p. 268
p. 268
p. 268
Magnifying/Shrinking the
Waveform Display (Zoom)
Here's how to change the magnification of the sample display.
1.
In the Sample Edit screen, press [F6 (Zoom)].
The Zoom window will appear.
2.
Use [CURSOR] to change the magnification of the display.
• Horizontal axis (time axis): 1/1–1/65536
Press to increase the display magnification.
Press to decrease the display magnification.
• Vertical axis (waveform amplitude axis): x1–x128
Press to increase the display magnification.
Press to decrease the display magnification.
3.
Press [F8 (Close)] to close the window.
Even without displaying the Zoom window, you can press
to expand/shrink the horizontal axis, or hold down [SHIFT]
and press to expand/shrink the vertical axis.