Saving The Style You Recorded - Roland PRELUDE MUSIC KEYBOARD 2 Supplementary Manual

Creating a new Style
I
The Relation between Note Value Length
and Gate Time
The relation between the length of the note value and the
gate time is shown below. Since the Prelude's song
recorder uses a TPQN (Ticks Per Quarter Note; i.e.,
resolution) of 120, a quarter note gate time is 120 ticks.
Note Gate time
15
1/32
1/16T 20
30
1/16
40
1/8T
1/16. 45
60
1/8
1/4T 80
90
1/8.
1/4 120
160
1/2T
1/4. 180
1/2 240
1/1 480
2/1 960
The gate time that is recorded in step recording will be
the original gate time value multiplied by the value of the
Gate Time parameter. For example, if the Gate Time
parameter is set to "80%," inputting a quarter note will
mean that the gate time is 120 x 0.8= 96.
12

Saving the Style you recorded

A Style you've recorded can be saved as a User Style.
The following content is saved.
• Recording data for each Division
• Style MFX settings (MFX Type, MFX Chorus/Reverb Send,
MFX Sw)
• STYLE MAKEUP settings
• One Touch settings (you can select whether these will be
saved)
1. Press [WRITE].
The STYLE NAME screen will appear.
Assigning a name to the Style
2. Use [ ] [ ] to move the cursor, and use the VALUE
dial to change the character.
Enter a Style name of up to 16 characters.
The following characters are available.
A–Z a–z 0–9 ! # $ % & ' ( ) - @ ^ ` { } _
Button
Selects the type of character. Each time you
press this, you will alternately select the first
[0] (TYPE)
character of a character set: uppercase (A),
lowercase (a), or numerals and symbols (0).
[1] (DELETE) Deletes the character at the cursor location.
[2] (INSERT)
Inserts a space at the cursor location.
From a naming screen you can press [MENU] and select
"1. Undo" to return the name to what it was before you
changed it.
From [MENU] you can select "2. To Upper" or press [
change the character at the cursor to uppercase.
From [MENU] you can select "3. To Lower" or press [
change the character at the cursor to lowercase.
From [MENU] you can select "4. Delete All" to clear all the
characters you were inputting.
Explanation
] to
] to