Editing The Pad Settings (Pad Setting); Exchanging Pads (Pad Exchange) - Roland Fantom G8 User Manual

Using the Pads

Editing the Pad Settings (PAD SETTING)

Press [PAD SETTING] to access the pad settings/information screen.
1.
Press [PAD SETTING].
The Pad Setting screen will
appear. The content shown
in the screen will depend on
the pad mode.
2.
Use [CURSOR] to move
the cursor to a parameter.
3.
Turn the VALUE dial or
use [INC] [DEC] to edit the
pad settings.
4.
To save the settings, press [F7 Write].
The location in which the settings are saved will depend on the
sound generator mode, the pad mode, and the settings of "Pad
Assign Source" (p. 292).
5.
Press [F8 Exit] to return to the previous screen.
F-key operations in the Pad Setting screen
F-key Explanation
F1 Pad settings for System
System (p. 190)
F2 Pad Exchange function
Pad Exchg (p. 190)
F3 Quick Setup function
Quick Setup (p. 192, p. 195, p. 197)
F4 Applies the Play Mode
PlayMode All to all (p. 195)
F6 Switches you between
Rhythm Ptn the RHYTHM PTN and
/ RPS RPS modes.
F7 Saves the settings of the
Write Pad Setting screen
F8 Exits the Pad Setting
Exit screen
190
Display mode
All modes
* Except for 15 USER GROUP
and 16 FAVORITE
2 RHYTHM,
3 CHORD MEMORY,
4 ARPEGGIO,
5 RPS,
6 RHYTHM PTN,
9 BOOKMARK only
2 RHYTHM,
5 RPS,
6 RHYTHM PTN only
5 RPS only
5 RPS,
6 RHYTHM PTN only
1 SAMPLE PAD,
2 RHYTHM,
3 CHORD MEMORY,
4 ARPEGGIO,
5 RPS,
6 RHYTHM PTN only
All modes
* Except for 15 USER GROUP
and 16 FAVORITE
Editing settings common to all pads
(System settings)
In the Pad Setting screen, press [F1 System] to access the system
setting screen where you can edit settings that are common to all
pads. Here you can edit the following parameters.
• "Pad Assign Source" (p. 292)
• "Pad Velocity" (p. 292)
• "Pad Sens (Pad Sensitivity)" (p. 292)
• "Pad Aftertouch Sens (Pad Aftertouch Sensitivity)" (p. 292)
• "Pad Roll Resolution" (p. 292)
• "Pad Mode" (p. 292)
1.
Press [PAD SETTING].
The Pad Setting screen will appear.
2.
Press [F1 System].
The pad-related items of the System Setup screen will appear.
For details on each parameter, refer to "Dynamic Pad" (p. 292).
3.
To save the settings, press [F7 Sys Write].
4.
Press [F8 Exit] to return to the Pad Setting screen.

Exchanging Pads (Pad Exchange)

Here's how to exchange two selected pads.
This function is available only if the pad mode is 2 RHYTHM, 3
CHORD MEMORY, 4 ARPEGGIO, 5 RPS, 6 RHYTHM PTN, or
9 BOOKMARK.
1.
Press [PAD SETTING].
2.
Press [F2 (Pad Exchg)].
3.
Select the two pads you want to exchange.
Use the VALUE dial or [INC] [DEC], or press the pads directly.
4.
Press [F8 (Execute)] to execute the exchange.