Knob/Slider - Roland Fantom G8 User Manual

Knob/Slider

Knob Slider Mode
Specifies whether, when a knob or slider is moved, its position will
immediately be output as control data (DIRECT) or whether control
data will be output only after the knob or slider position has passed
through the value of the parameter (CATCH).
If you select "MULTI" as the Knob Slider Mode setting, you'll be
able to use the knobs, sliders, D Beam, and S1/S2 buttons to
simultaneously control multiple parts (each part whose keyboard
switch is on).
Value
DIRECT: Moving a knob or slider will always transmit the
control data of its current position
When you move a knob or slider, it will begin
CATCH:
transmitting control data only when its position
passes the value of the parameter
The knobs, sliders, D Beam, and S1/S2 buttons will
MULTI:
simultaneously control multiple parts (each part
whose keyboard switch is on). The knobs and sliders
will operate in the same way as "DIRECT."
MULTI (multi-part control) will control multiple parts only if
CC, AFTERTOUCH, or PITCH BEND is assigned to the
controller.
Depending on the parameter being controlled with the sliders
or controls, you may not be able to obtain the CATCH effect,
even though you've set the Knob Slider Mode to "CATCH."
Knob Assign Select
Specifies whether the operation of knobs 1–4 will automatically
change according to the screen (SCREEN) or will be fixed at the
Knob 1–4 Assign settings (FIX).
Value: FIX, SCREEN
Knob Assign Source
Specifies whether the operation of knobs 1–4 will follow the system
settings Knob 1–4 Assign (SYS) or the setting of the live set or studio
set (TEMP).
Value: SYS, TEMP
System Settings (Settings Common to All Modes)
Knob 1–4 Assign
Specify the functions that will be controlled by the knobs.
Value
OFF:
CC01–31, CC32(OFF), 33–95:
AFTERTOUCH:
PITCH BEND:
ARPEGGIO ACCENT:
ARPEGGIO SHUFFLE:
ARPEGGIO OCT UP:
ARPEGGIO OCT DOWN: The range in which the arpeggio is
MASTER LEVEL:
DIGITAL/USB INPUT LEVEL:
* If the system setting "Knob Assign Source" (p. 293) is "System,"
the system setting will be used. If this is "TEMP," the setting of the
live set or studio set will be used.
Slider Assign Select
Specifies whether the operation of sliders 1–8 will automatically
change according to the screen (SCREEN) or will be fixed at the
Slider 1–8 Assign settings (FIX).
Value: FIX, SCREEN
Slider Assign Source
Specifies whether the operation of sliders 1–8 will follow the system
settings Slider 1–8 Assign (SYS) or the settings of the live set or
studio set (TEMP).
Value: SYS, TEMP
Slider 1–8 Assign
Specify the functions that will be controlled by the sliders.
Value
OFF:
CC01–31, CC32(OFF), 33–95:
AFTERTOUCH:
PITCH BEND:
ARPEGGIO ACCENT:
ARPEGGIO SHUFFLE:
ARPEGGIO OCT UP:
ARPEGGIO OCT DOWN: The range in which the arpeggio is
* If the system setting "Slider Assign Source" (p. 293) is "System,"
the system setting will be used. If this is "TEMP," the setting of the
live set or studio set will be used.
Off
Control Change
Aftertouch
Pitch Bend
Arpeggio accent rate
Arpeggio shuffle rate
The range in which the arpeggio is
sounded will rise in steps of an octave.
sounded will lower in steps of an octave.
Master Level (p. 297)
Digital/USB Input Level (p. 258)
Off
Control Change
Aftertouch
Pitch Bend
Arpeggio accent rate
Arpeggio shuffle rate
The range in which the arpeggio is
sounded will rise in steps of an octave.
sounded will lower in steps of an octave.
293