Saving The Sound Settings In A Live Set (Live Set Write); Changing The Order Of Live Sets (Live Set Swap) - Roland RD-800 Owner's Manual

Saving the Sound Settings in a Live Set (Live Set Write)

1.
Press the [WRITE] button, getting the
indicator to light.
The Live Set Write screen appears.
2.
Use the cursor [ ] [ ] buttons to move the
cursor to the position at which you want to
enter a character.
3.
Use the [DEC] [INC] buttons or the value dial to enter the
characters.
Operation
[SHIFT] + [ ] button
[SHIFT] + [ ] button
[SHIFT] + [ ] button
[SHIFT] + [ ] button
4.
Repeat steps 2–3 to input the name.
5.
Press the cursor [ ] button to move the cursor to the destination
Live Set number.
6.
Select the save-destination Live Set number, either by using the
[DEC] [INC] buttons or the value dial.
7.
When you have finished determining the save destination and the
name for the new Live Set, press the [ENTER] button.
The confirmation message appears.
8.
When the [ENTER] button is pressed, saving of the Live Set begins.
NOTE
Never switch off the power while "Executing... " appears in the display.

Changing the Order of Live Sets (Live Set Swap)

You can arrange the Live Sets into the order you like. It is
convenient to arrange Live Sets in the order in which you'll be
using them for your live performance.
1.
Select a Live Set whose order you want to change (p. 13).
2.
While holding down the [SHIFT] button,
press one of the LIVE SET [A]–[J] buttons
to select the bank that contains the other
Live Set whose order you want to change.
LIVE SET SWAP screen appears.
NOTE
You can't use the Live Set Swap function in the following situations.
• If the Live Set screen shows the "EDITED" icon.
• If a tone is selected by the tone buttons.
• In the Menu screen, Write screen, or Demo screen.
• When RHYTHM, AUDIO PLAY, or AUDIO REC are operating.
MEMO
You can also access this screen from the Utility screen (p. 47) by moving the
cursor to "Live Set Swap" and pressing the [ENTER] button.
3.
You can use the [INC] [DEC] buttons, value dial, and LIVE SET [A]–
[J] buttons to change the swap-destination Live Set.
You can also use the cursor to select the swap-source Live Set, and change it
to a different Live Set.
MEMO
• You can also select STARTUP.
• When you play the keyboard, you'll hear the sound of the Live Set that's
selected by the cursor.
Explanation
Delete one character (DELETE)
Insert one space (INSERT)
Switch character sets
Switch uppercase/lowercase
Specifying the sound selected at startup (STARTUP)
The RD-800 lets you specify the state (sound) in which it will power-on.
1.
Select the desired sound.
Selecting a Tone
Selecting a Live Set
2.
Press the [WRITE] button.
The Live Set Write screen appears.
3.
Move the cursor to the Live Set bank/
number.
4.
Press the [DEC] button several times or
turn the value dial toward the left to select
STARTUP.
5.
Press the [ENTER] button.
The confirmation message appears.
6.
Press the [ENTER] button.
The current setting will be saved to STARTUP.
The next time you start the RD-800, it will start up with the STARTUP
condition (sound) that you saved.
4.
Press the [ENTER] button.
The confirmation message appears.
5.
Press [ENTER] button to execute the swap.
You can repeat steps 3–5 to change the order of other Live Sets.
If you decide to cancel Live Set Swap, press the [EXIT/SHIFT] button.
MEMO
In this case, the originally-selected Live Set number will be selected.
NOTE
Never switch off the power while "Executing... " appears in the display.
Quick Guide
13
page
13
page
23