Level/Pan (When The Part Group Is External); Key Range - Roland Fantom G8 User Manual

Level/Pan
(When the Part Group is External)
External Bank Select MSB
If you want a Bank Select number MSB (controller number 0) to also
be transmitted when you switch Live/Studio Sets, specify the value
that you want to transmit (0–127) for each part. If you do not want
this message to be transmitted, set this to "---."
Value: 0–127, ---
The data of the part for which the Keyboard Switch is turned off
will not be transmitted.
External Bank Select LSB
If you want a Bank Select number LSB (controller number 32) to also
be transmitted when you switch Live/Studio Sets, specify the value
that you want to transmit (0–127) for each part.
Value: 0–127, ---
The data of the part for which the Keyboard Switch is turned off
will not be transmitted.
External Program Number
(External Program Change Number)
If you want a Program Change number to also be transmitted when
you switch Live/Studio Sets, specify the value that you want to
transmit (0–128) for each part. If you do not want this message to be
transmitted, set this to "---."
Value: 1–128, ---
The data of the part for which the Keyboard Switch is turned off
will not be transmitted.
External Level
If you want Volume messages to also be transmitted when you select
a Live/Studio Set, specify the desired value (0–127) for the part. If
you do not want this message to be transmitted, set this to "---."
Value: 0–127, ---
The data of the part for which the Keyboard Switch is turned off
will not be transmitted.
External Pan
If you want Pan messages to also be transmitted when you select a
Live/Studio Set, specify the desired value (L64–0–63R) for the part.
If you do not want this message to be transmitted, set this to "---."
Value: L64–0–63R, ---
These messages will not be transmitted by parts whose
Keyboard Switch is turned off.
Creating a Live/Studio Set

Key Range

Keyboard Switch
Specifies, for each part, whether or not the keyboard controller
section will be connected to the internal sound generator.
Normally you will leave this off; you can turn it on if you want to
layer sounds.
Value: On, OFF
Keyboard Range Lower
(Part Keyboard Range Lower)
Specifies the lowest note that the tone will sound for each part.
Value: C-–UPPER
Keyboard Range Upper
(Part Keyboard Range Upper)
Specifies the highest note that the tone will sound for each part.
Value: LOWER–G9
When the Key Range (p. 94) is set for each individual tone in a
patch, sounds are produced in the range where the Key Range
of each tone and the Key Range for the part overlap.
fig.09-006.e
Key range specified for Performance
Key range specified for Patch
The range in which notes will play
* Keyboard Range is valid only for parts whose "Keyboard Switch"
(p. 135) is on.
Velocity Range Lower
For each part, specifies the bottom of the velocity range.
Value: 1–127
Velocity Range Upper
For each part, specifies the top of the velocity range.
Value: 1–127
* Velocity Range is valid only for parts whose "Keyboard Switch" (p.
135) is on.
When the Velocity Range (p. 95) is set for each individual tone
in a patch, sounds are produced in the range where the Key
Range of each tone and the Key Range for the part overlap.
135