Sample-related changes
Extended patch groups
You can now select samples (card/user) from
the patch list as well (Sample Auto Patch).
This allows you to play a sample in a pitched
manner just as you would play a normal patch.
fig.03-00
fig.03-01
The following two groups have been added to
the patch groups. If there are samples in
memory, sample names will be displayed as
patch names.
User Sample (USAM): 1–2000
Samples in user memory can be used as
patches.
Card Sample (CSAM): 1–7000
Samples in the memory card can be used
as patches.
* If there are no samples in memory, this will
indicate "Empty."
* In the case of a stereo sample, choose the sample
number for the L channel. It will play as a
stereo patch. (If you choose the sample number
for the R channel, "---" will be indicated for it,
and it will not be playable.
Saving a sample auto patch
When you edit and save these patches, they will
be saved in the USER or CARD group in the
same way as conventional patches.
* Note that in this case, there will be no sound if
you unload (Owner's Manual; p. 147) the
sample.
* Unsaved samples will be lost when you turn off
the power. If you want to keep your sample,
press [WRITE] to save it (Owner's Manual; p.
159).
Bank Select and Program Change
Correspondence Chart
Group
Number
PR-I
001–128
USAM
0001–
2000
CSAM
0001–
7000
Bank Select
Program
Number
MSB
LSB
87
72
1–128
64
0
1–128
:
14
15
1–80
65
0
1–128
:
53
54
1–88
39