Roland Fantom G8 User Manual page 153

Part Output Assign
16
Specifies for each part how the direct sound will be output.
Value:
A, B: Output to the OUTPUT A (MIX) jack or OUTPUT B
jack in stereo without passing through multi-effects.
Output to the INDIVIDUAL 1–4 jacks in mono
1–4:
without passing through multi-effects.
If you've made settings so that sounds are separately routed to
the INDIVIDUAL 1 jack and INDIVIDUAL 2 jack, but no plug
is actually inserted in the INDIVIDUAL 2 jack, the sounds
routed to INDIVIDUAL 1 and INDIVIDUAL 2 will be mixed
and output from the INDIVIDUAL 1 jack.
If the Mix/Parallel parameter is set to "MIX," all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 298).
Chorus Sw
17
Switches the chorus on/off.
Value: ON, OFF
Chorus Type
18
Selects either chorus or delay. For details on chorus parameters,
refer to "Chorus Parameters" (p. 184).
Value: 0 (Off)–3 (GM2 Chorus)
Chorus Level
19
Adjusts the volume of the sound that has passed through
chorus.
Value: 0–127
Chorus Output Select
20
Specifies how the sound routed through chorus will be output.
Value
Output to the OUTPUT jacks in stereo.
MAIN:
REV: Output to reverb in mono.
M+R: Output to the OUTPUT jacks in stereo, and to reverb
in mono.
When set to "MAIN" or "M+R," the OUTPUT jack from which
the sound is output is set in Chorus Output Assign.
Chorus Output Assign
21
Selects the pair of OUTPUT jacks to which the chorus sound is
routed when Chorus Output Select is set to "MAIN" or "M+R."
Value
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
When Chorus Output Select is set to "REV," this setting will
have no effect.
If the Mix/Parallel parameter is set to "MIX," all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 298).
Reverb Sw
22
Switches the reverb on/off.
Value: ON, OFF
Reverb Type
9 23
Selects the type of reverb. For details on reverb parameters,
refer to "Reverb Parameters" (p. 185).
Value: 0 (Off)–10 (CHURCH)
Reverb Level
24
Adjusts the volume of the sound that has passed through
reverb.
Value: 0–127
Reverb Output Assign
25
Specifies how the sound routed through reverb will be output.
Value
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
If the Mix/Parallel parameter is set to "MIX," all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 298).
Adding Effects
153