Applying Effects In Studio Mode; Specifying How The Sound Will Be Output (Routing); Signal Flow Diagram And Parameters - Roland Fantom G8 User Manual

Adding Effects
Applying Effects in Studio
Mode
Studio mode allows you to use two multi-effects (MFX1, MFX2), one
chorus, and one reverb.
These effects will operate according to the effect settings of the
studio set.
Specifying How the Sound Will Be
Output (Routing)
Here you can make overall settings for effects, and the output
destination and level of each signal.
fig.22-006.eps_50
For details on these settings, refer to "Making Effect Settings"
(p. 151).
In this screen, the name of the parameter selected by the cursor
is shown in the "
screen. The current value of the parameter is also shown here.
154
" area in the lower left of the

Signal Flow Diagram and Parameters

fig.22-007
6
8
11
5
7
2
1
9
3
10
4
Tone Select
1
Select the tone for which you want to make settings.
Value: ALL, 1–4
This parameter is Rhythm Key Select when a rhythm set is
being selected. You can select the rhythm tone (A0–C8) for
which you want to make settings.
Tone Output Level
2
Set the level of the signal that is sent to the output destination
specified by Output Assign.
Value: 0–127
Tone Chorus Send Level
3
Sets the level of the signal sent to chorus for each tone.
Value: 0–127
Tone Reverb Send Level
4
Sets the level of the signal sent to reverb for each tone.
Value: 0–127
Tone Output Assign
5
Specifies how the direct sound of each tone will be output.
Value:
PFX: Output through patch multi-effects (PFX).
DRY: Output without passing through patch multi-effects
(PFX).
PFX Sw (Patch Multi-Effects Switch)
1 6
Switches the patch multi-effect on/off.
Value: ON, OFF
PFX Type (Patch Multi-Effects Type)
7
Use this parameter to select from among the 76 available patch
multi-effects. For details on patch multi-effects parameters, refer
to "MFX/PFX Parameter" (p. 161).
Value: 0 (Through)–76
17
13
20
23
12
18
16
21
19
22
20
23
18
21
19
22
26 27 28
14
24
25
15 31 32
29
30