Creating A Sample Set; How To Make Sample Set Settings; Editing A Sample Set Quickly (Patch Zoom Edit); Sample Set - Roland Fantom G8 User Manual

Creating a Sample Set

With the Fantom-G, you have total control over a wide variety of
settings. Each item that can be set is known as a parameter. When
you change the values of parameters, you are doing what is referred
to as Editing. This chapter explains the procedures used in creating
sample sets, and the functions of the sample set parameters.
How to make Sample Set
settings
On the Fantom-G, a waveform (wave) obtained by audio recording
or sampling is called a "sample." A sample set consists of sixteen
samples handled as a set. You can specify how the samples will play
when you press a pad or note on the keyboard.
Here's how to create a new sample set by starting with one of the
provided sample sets.
Editing a Sample Set Quickly
(Patch Zoom Edit)
The Patch Zoom Edit screen lets you edit the most important
parameters. If you want to have access to all parameters, use the
Patch Pro Edit screen (p. 127).
1.
Select the sample set whose settings you want to edit (p. 53).
2.
Press [PATCH].
The Patch Zoom Edit screen appears.
fig.07-001_50
F-key operations in the Patch Zoom Edit screen
F-key Explanation
F4 Sample
Util Menu Set
Initialize
F5 Accesses the PFX (Patch Multi-effect) ed-
PFX iting screen.
F6 Accesses the Patch Pro Edit screen, where
Pro Edit you can edit all of the parameters.
F7 Selects the part to be edited.
Part Select
126
Parameters
Page
Initializes the settings of p. 127
the currently selected

sample set.

p. 157
p. 127
–
3.
Press [CURSOR] button to move the cursor to the
parameter you wish to modify.
For details on each parameter, refer to the following pages.
Parameter name Page
Wave p. 130
Pitch p. 130
Amp p. 131
• To change the part that you want to edit
Press [F7 (Part Select)].
4.
Turn the VALUE dial, or Press [INC] [DEC] to set a value.
5.
Repeat steps 3–4 to set each parameter you want to edit.
6.
If you wish to save the changes you've made, press
[WRITE] to perform the Save operation (p. 128). If you do
not wish to save changes, press [EXIT] to return to the
Single Play screen.
If you return to the Single Play screen without saving, the "
symbol will be displayed at the right of the sample set name,
indicating that the sample set settings have been edited.
The settings you edit are temporary, and will be lost if you turn
off the power, switch the sound generator mode, or select a
different sound.
"