Editing All Parameters (Patch Pro Edit); Initializing Sample Set Settings (Sample Set Initialize) - Roland Fantom G8 User Manual

Editing All Parameters (Patch Pro Edit)

The Patch Pro Edit screen allows you to edit all parameters.
1.
Select the sample set whose settings you want to edit (p. 53).
If you want to create a sample set from scratch (rather than
starting from an existing sample set), execute the Initialize
operation (p. 127).
2.
Press [PATCH] twice.
The Patch Pro Edit screen appears.
fig.07-001_50
Groups
F-key operations in the Patch Pro Edit screen
F-key Explanation
F1 Moves the edit group tab upward.
Group/Up
F2 Moves the edit group tab downward.
Group/Down
F3 This is shown if you're editing the WAVE
Set Stereo group. It recalls the right wave (R) from
the left wave (L) of a stereo wave.
F4 Sample
Util Menu Set
Initialize
F5 Accesses the PFX (Patch Multi-effect) ed-
PFX iting screen.
F6 Accesses the Patch Zoom Edit screen,
Zoom Edit where you can edit the most important
parameters.
F7 Selects the part to be edited.
Part Select
3.
The parameters are organized into several editing groups.
Press [F1 (Up)] or [F2 (Down)] to select the tab for the
editing group that contains the parameter you wish to edit.
For details on how the parameters are grouped, refer to
"Functions of Sample Set Parameters" (p. 129).
• To change the part that you want to edit
Press [F7 (Part Select)].
4.
Use or to move the cursor to the parameter you
wish to modify.
5.
Turn the VALUE dial, or Press [INC] [DEC] to set a value.
Parameters
Page
–
–
p. 130
Initializes the settings of p. 127
the currently selected
sample set.
p. 157
p. 126
–
Creating a Sample Set
6.
Repeat steps 3–5 to set each parameter you want to edit.
7.
If you wish to save the changes you've made, press
[WRITE] to perform the Save operation (p. 128). If you do
not wish to save changes, press [EXIT] to return to the
Single Play screen.
If you return to the Single Play screen without saving, the "
symbol will be displayed at the right of the sample set name,
indicating that the sample set settings have been edited.
The settings you edit are temporary, and will be lost if you turn
off the power, switch the sound generator mode, or select a
different sound.
Initializing Sample Set Settings
(Sample Set Initialize)
"Initialize" means to return the settings of the currently selected
sound to a standard set of values or to the factory settings.
The Initialize operation will affect only the currently selected
sound; the sounds that are stored in user memory will not be
affected. If you wish to restore all of the Fantom's settings to
their factory values, perform a Factory Reset (p. 284).
1.
Select the sample set that you want to initialize (p. 53).
2.
Press [PATCH].
3.
Press [F4 (Util Menu)].
The Utility Menu window appears.
4.
Press or to choose "Sample Set Initialize," and
then press [F8 (Select)].
To cancel, press [F7 (Cancel)].
A message will ask for confirmation.
5.
Press [F7 (OK)].
To cancel, press [F8 (EXIT)].
"
127