Roland Fantom G8 User Manual page 165

11: PHASER
A phase-shifted sound is added to the original sound and
modulated.
fig.MFX-11
L in
Phaser
Mix
Mix
Phaser
R in
Parameter Value
Mode 4-STAGE, 8-
STAGE, 12-STAGE
Manual # 0–127
Rate # 0.05–10.00 Hz, note
Depth 0–127
Polarity INVERSE,
SYNCHRO
Resonance # 0–127
Cross -98– +98 %
Feedback
Mix # 0–127
Low Gain -15– +15 dB
High Gain -15– +15 dB
Level 0–127
12: STEP PHASER
The phaser effect will be varied gradually.
fig.MFX-12
L in
Step Phaser
Step Phaser
R in
Parameter Value
Mode 4-STAGE, 8-
STAGE, 12-STAGE
Manual # 0–127
Rate # 0.05–10.00 Hz, note
Depth 0–127
Polarity INVERSE,
SYNCHRO
Resonance # 0–127
2-Band
L out
EQ
2-Band
R out
EQ
Description
Number of stages in the phaser
Adjusts the basic frequency from
which the sound will be modu-
lated.
Frequency of modulation
Depth of modulation
Selects whether the left and right
phase of the modulation will be
the same or the opposite.
INVERSE: The left and right
phase will be opposite. When
using a mono source, this
spreads the sound.
SYNCHRO: The left and right
phase will be the same. Select
this when inputting a stereo
source.
Amount of feedback
Adjusts the proportion of the
phaser sound that is fed back
into the effect. Negative (-) set-
tings will invert the phase.
Level of the phase-shifted sound
Gain of the low range
Gain of the high range
Output Level
2-Band
L out
EQ
Mix
Mix
2-Band
R out
EQ
Description
Number of stages in the phaser
Adjusts the basic frequency from
which the sound will be modu-
lated.
Frequency of modulation
Depth of modulation
Selects whether the left and right
phase of the modulation will be
the same or the opposite.
INVERSE: The left and right
phase will be opposite. When
using a mono source, this
spreads the sound.
SYNCHRO: The left and right
phase will be the same. Select
this when inputting a stereo
source.
Amount of feedback
Parameter Value
Cross -98– +98 %
Feedback
Step Rate # 0.10–20.00 Hz, note
Mix # 0–127
Low Gain -15– +15 dB
High Gain -15– +15 dB
Level 0–127
13: MULTI STAGE PHASER
Extremely high settings of the phase difference produce a deep
phaser effect.
fig.MFX-13
L in
Multi Stage
Phaser
R in
Resonance
Parameter Value
Mode 4-STAGE, 8-
STAGE,
12-STAGE, 16-
STAGE, 20-
STAGE, 24-STAGE
Manual # 0–127
Rate # 0.05–10.00 Hz, note
Depth 0–127
Resonance # 0–127
Mix # 0–127
Pan # L64–63R
Low Gain -15– +15 dB
High Gain -15– +15 dB
Level 0–127
14: INFINITE PHASER
A phaser that continues raising/lowering the frequency at which the
sound is modulated.
fig.MFX-14
L in
Infinite Phaser
R in
Parameter Range
Mode 1, 2, 3, 4
Speed # -100– +100
Resonance # 0–127
Mix # 0–127
Pan # L64–63R
Low Gain -15– +15 dB
High Gain -15– +15 dB
Level 0–127
Effects List
Description
Adjusts the proportion of the
phaser sound that is fed back
into the effect. Negative (-) set-
tings will invert the phase.
Rate of the step-wise change in
the phaser effect
Level of the phase-shifted sound
Gain of the low range
Gain of the high range
Output Level
L out
Pan L
2-Band
EQ
Mix
Pan R
R out
Description
Number of phaser stages
Adjusts the basic frequency from
which the sound will be modu-
lated.
Frequency of modulation
Depth of modulation
Amount of feedback
Level of the phase-shifted sound
Stereo location of the output
sound
Gain of the low range
Gain of the high range
Output Level
L out
Pan L
2-Band EQ
Pan R
R out
Explanation
Higher values will produce a
deeper phaser effect.
Speed at which to raise or lower
the frequency at which the sound
is modulated
(+: upward / -: downward)
Amount of feedback
Volume of the phase-shifted
sound
Panning of the output sound
Amount of boost/cut for the
low-frequency range
Amount of boost/cut for the
high-frequency range
Output volume
165