Ocp Problems; Robotics (Hand) Problems; Table 32 Ocp Problems; Quantum Scalar 50 User's Guide - Quantum Scalar 50 User Manual

OCP Problems

Table 32 OCP Problems

Robotics (Hand)
Problems

Quantum Scalar 50 User's Guide

Table 32 describes corrective actions for OCP problems.
5
Problem
The OCP is blank.
The OCP does not
respond to
buttons.
An error number
or event is
displayed.
Table 33 describes corrective actions for robotics or hand problems.
5
Common Problems and Solutions
Corrective Action
• Physically remove the AC power by removing
all power cords from the power supply(s) and
reconnect them.
• Confirm that power is on and if the OCP is still
blank, contact an authorized Quantum field
service engineer (see
• Verify that the buttons are not stuck
underneath the front bezel.
• Physically remove the AC power by removing
all power cords from the power supply(s) and
reconnect them. Power the library on and if the
OCP still does not respond to buttons, contact
an authorized Quantum field service engineer
(see "Contacts" on page xx).
Write down the error number and contact an
authorized Quantum field service engineer (see
"Contacts" on page xx).
Chapter 5 Troubleshooting
"Contacts" on page xx).
166