Set Separate Fax Forwarding Destinations For Line 1 & Line 2 - Muratec MFX-C2280 Feature Overview Manual

Set Separate Fax Forwarding Destinations
for Line 1 & Line 2
PRE-REqUISITES
• Forwarding destinations have been registered in a One-Touch key
(program an Email Address and SMB Folder destination)
APPLICATION
This medical office is shared
by two prominent doctors,
each of which has a different
method of handling their
incoming fax transmission .
They have equipped their
bizhub MFP with two fax
lines, one line dedicated to
each doctor . They have also programmed
their machine with separate forwarding
commands for each line in order to meet
the doctor's requirements—one doctor wants all incoming faxes forwarded
to the administrator's Email address and the other doctor wants all incoming
faxes forwarded to an SMB folder .
1 . Touch Utility .
2 . Touch Administrator Settings .
3 . Enter Password (Default is 1234567812345678) .
4 . Touch OK .
5 . Touch Fax Settings .
6 . Touch TX/RX Settings .
7 . Access screen 3/3 by pressing the down arrow
8 . Touch Individual Receiving Line Set Up .
9 . Select ON from Job Setting Menu .
Muratec MFX-C3680 Series
Line 2
1
2
You will not be able to access the
necessary menus if the Pre-requisites
have not been met.
If not on the home screen,
touch the Menu key on
the Control Panel
.
!
Fax Features
.
19