Connection And Main Settings; Connecting The Power Cord; Connecting The Lan Cable - Muratec MFX-2550 User Manual
Plain-paper digital scanner/printer/copier/fax
Hide thumbs
Also See for MFX-2550:
- Field engineering manual (415 pages) ,
- User manual (327 pages) ,
- Printer manual (193 pages)
Table of Contents
Advertisement
Connection and Main Settings
Connecting the Power Cord
Warning
•
Connect the power cord to the power jack, and confirm that it is firmly inserted.
Loose connections may cause fires.
•
Make sure to connect the ground wire to prevent electrocution in case of electrical
leakage.
•
Confirm that there is no dust attached to the power plug before inserting it into
the outlet. Remove, inspect, and if necessary, clean the power plug once every six
months to a year. Dust attached to the power plug may cause fires or electrocutions.
1
Connect the power cord to the power jack on the left side of the machine.
Secure the power cord using the included clamp and screw.
2
Insert the power plug into the power outlet.
Connecting the LAN Cable
1
Attach a ferrite core to the LAN cable.
Make a loop near the connector of the cable.
1-12
Connection and Main Settings
- Quick Links:
- Specifying the Network Settings
Hide quick links:
Advertisement
Table of Contents
