Paper Selection - Kyocera KM-3035 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
● Paper selection
Perform the following procedure to set whether the copier will
automatically select the same size of copy paper as the original once
an original is set, or whether the designated default drawer[cassette]
will be automatically selected.
1 Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-62.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Select paper" in the settings list on the left side of the
touch panel and then touch the "Change #" key.
The "Select paper" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Select paper
Select paper type(APS)
Default drawer
Drawer for cover paper
Default magnification
Default setting
Metric specifications
Default setting / Counter
Copy default
Default menu
Select paper
Select paper type(APS)
Default cassette
Cassette for cover paper
Default mode
Default setting
7-68
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
APS
Plain
1st paper
Bypass
Change #
Manual
Setting mode
APS
Plain
1st paper
Bypass
Change #
Manual
3 Touch the "APS" key to have the same size of copy paper as
the original selected automatically, and the "Default
drawer[cassette]" key to have paper fed from the designated
default drawer[cassette].
Inch specifications
Select paper
D e fa u l t s e t t i n g - C o py d e fa u l t
End
Metric specifications
Counter
check
Select paper
User
Adjustment
Default setting - Copy default
End
Counter
check
NOTE
User
Adjustment
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting"screen.
Close
Up
6 Touch the "End" key. The touch panel will return to the
Down
contents of the "Basic" tab.
Close
Up
Down
S e t a u t o p a p e r s e l e c t i o n m o d e.
APS
Default
drawer
S e t t i n g p a p e r s e l e c t m o d e.
APS
Default
cassette
Back Close
Back Close