Kyocera KM-3035 Operation Manual page 220

Section 7 COPIER MANAGEMENT FUNCTIONS
● Sort/Finished mode ON/OFF
Perform the following procedure to determine whether or not the Sort
and/or the Finished modes will be the default setting in the initial
mode.
1 Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-62.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Sort" in the settings list on the left side of the touch
panel and then touch the "Change #" key.
The "Sort" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Default setting
Metric specifications
Default setting / Counter
Copy default
Default menu
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Default setting
7-78
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
Sort : On / Offset : Off
Rotate
Left 1 / " 0"
4
Border 1 / " Center 1 / "
4 2
999 Set Change #
Setting mode
Sort : On / Group : Off
Rotate
Left 6mm 0mm
Border 6mm Center 12mm
Change #
999 Set
3 Touch the "Sort:On" key under "Sort" if you want to make the
Sort mode the default setting in the initial mode.
Inch specifications
Sort
D e fa u l t s e t t i n g - C o py d e fa u l t
Metric specifications
End
Sort
Counter
check
User
Adjustment
Default setting - Copy default
4
Touch the "On" ["1 set"] key under "Offset" ["Group"] if you
End
want to make the Finished mode the default setting in the
initial mode.
Counter
check
• In metric specification copiers, if you select "Sort:Off" under
User
"Sort", the "1 set" key that appears under "Group" will
Adjustment
change to the "Output each page" key.
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
5 Touch the "Close" key. The touch panel will return to the
Close
screen in step 2.
Up
Down
6 Touch the "Close" key once again. The touch panel will return
to the "Default setting"screen.
7 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Select default mode for sort, ON or OFF.
Sort O f f s e t
Sort : Off
O f f
Sort : On
O n
Select default mode of sort, ON or OFF.
Sort Group
Sort : Off Off
1 set
Sort : On
Back Close
Close
Back