Kyocera KM-3035 Operation Manual page 49

Touch the "2 sided / 1 sided" ["2-sided / 1-sided"] key or
4
the "Book / 1 sided" ["Book / 1-sided"] key, as appropriate
to the type of originals being copied and the type of finished
copies to be made.
Inch specifications
Ready to copy.
2 sided/Separation
1 sided 1 sided
➔1 sided ➔2 sided
2 sided 2 sided
➔1 sided ➔2 sided
Book Book
➔1 sided ➔2 sided
Metric specifications
Ready to copy.
2-sided / Split
1-sided
1-sided
R2-sided
R1-sided
2-sided 2-sided
R1-sided R2-sided
Book Book
R1-sided R2-sided
5 Specify the binding direction of the originals.
Inch specifications
<for 2-sided originals>
ady to copy.
Separation
Original
Open from
1 sided
➔2 sided
left/right
d
2 sided Open from
➔2 sided
top
d
Book
➔2 sided
d
Metric specifications
<for 2-sided originals>
Ready to copy.
ided / Split
O r i g i n a l
ed 1-sided Left/Right
sided R2-sided binding
Top
ed 2-sided
binding
sided R2-sided
k Book
R2-sided
sided
Paper size
Set
11x8 1 / "
2
Register Back Close
Able to copy 1 sided (separate) or
2 sided copy using 1 sided original,
Book original or 2 sided original.
Paper size
Set
Register Back Close
A bl e t o c o py 1 - s i d e d ( s e p a ra t e ) o r
2 - s i d e d c o py u s i n g 1 - s i d e d o r i g i n a l ,
b o o k o r i g i n a l o r 2 - s i d e d o r i g i n a l .
<for open-faced originals>
to copy.
Registe on Register
Original
1 sided Open from
➔2 sided
left
Open from
2 sided
➔2 sided
right
Book
➔2 sided
<for open-faced originals>
to copy.
Register
R
O r i g i n a l
-sided
Left
R2-sided
binding
-sided
Right
R2-sided
binding
Book
R2-sided
Section 5 OTHER CONVENIENT FUNCTIONS
6 Follow the instructions on the right side of the touch panel
and verify the direction in which the originals were set.
IMPORTANT!
If the designation for the direction that the originals are set is not
correct, copying may be accomplished incorrectly.
Inch specifications
<for 1-sided or 2-sided originals>
Paper size
11x8
Register Back
Check direction
Check direction of
original top side.
Rear
Metric specifications
<for 1-sided or 2-sided originals>
Paper size
Register Back
C h e ck d i r e c t i o n
C h e ck d i r e c t i o n o f
o r i g i n a l .
Back Edge
7 Press the [Start] key. Scanning of the originals will start.
If you set the originals in the optional Document Processor,
copying will start automatically.
If you set an original on the platen, a message will appear
telling you to set the next original. In this case, go to the next
step.
8
Replace the first original with the next one and press the
[Start] key. Scanning of that next original will start.
9 Once you have finished scanning all of the originals, touch
the "Scanning finished" key. Copying will start.
<for open-faced originals>
Paper size
Set
1 / "
11x8 1
2
Close
Register Back
Check direction
Set the book original
top side direct to back.
Left top
corner
<for open-faced originals>
Set
Paper size
Close
Register Back
Check direction
Set book or iginal top
side direction to back.
Left top
corner
Set
/ "
2
Close
Set
Close
5-5