Accessing The Copy Management Menu Screen - Kyocera KM-3035 Operation Manual

(2) Accessing the copy management menu screen

Perform the following procedure in order to access the copy
management menu screen.
1 With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting"screen will be displayed.
2 Touch the "Management" key on the right side of the touch
panel.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Language Management
Bypass BOX Counter
setting Management check
Register Print User
orig. size report Adjustment
Language Management
Bypass Hard Disk Counter
setting Management check
Register Print User
orig. size report Adjustment
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Use the numeric keys on the keypad to enter the 4-digit
management code.
The factory default management code for 30 cpm copiers is
"3000", for 40 cpm copiers is "4000" and for 50 cpm copiers
is "5000".
If the entered management code matches the currently
registered one, the copy management menu screen will be
displayed.
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
End
4 Touch the key that corresponds to the desired procedure.
The setting screen for that procedure will be displayed.
Inch specifications
Management
Managem. Total
Management
End total
Default setting
Metric specifications
Management
Managem. Total
Management
total
Default setting
NOTES
• It is possible for you to change the 4-digit management code. (See
"Changing the management code" on page 7-56.)
• Perform the following procedure that corresponds to the desired
setting.
Register/Sett.
Each Mgt. Management Management
Total edit Def. Set.
Register/Sett.
Each Mgt. Management Management
Total edit Def. Set.
Close
Close
Close
Management
Off
On
Close
Management
Off
On
7-3