Original Size Registration - Kyocera KM-3035 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS

4. Original size registration

Perform the following procedure in order to register a custom original
size that can be used under the "Original size selection" procedure.
1
With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting"screen will be displayed.
2 Touch the "Register orig. size" key.
The "Register orig. size" screen will be displayed.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
7-90
Language Management
Bypass BOX Counter
setting Management check
Register Print User
orig. size report Adjustment
Language Management
Bypass Hard Disk Counter
setting Management check
Register Print User
orig. size report Adjustment
3 Select of the "Original size (custom 1)" to "Original size
(custom 4)" settings under the "Default menu" column on the
left side of the touch panel and then touch the "Change #"
key.
The corresponding setting screen will be displayed.
Inch specifications
Default setting / Counter
Register orig. size
Original size (custom 1)
Original size (custom 2)
Original size (custom 3)
Original size (custom 4)
Default setting
Metric specifications
Default setting / Counter
Register orig. size
Original size (custom 1)
Original size (custom 2)
Original size (custom 3)
Original size (custom 4)
Default setting
End
4 Touch the "+" key or the "-" key to change each of the
displayed sizes (Y = width and X = length) to the desired
settings.
If you do not want to register a custom original size, touch
the "Off" key.
Inch specifications
Original size (custom 1)
Register custom size original.
End
Off
On
Default setting - Register orig. size
Metric specifications
Original size (custom 1)
Register custom size original.
Off
On
Default setting - Register orig. size
5 Touch the "Close" key. The touch panel will return to the
screen in step 3.
6 Touch the "Close" key. The touch panel will return to the
screen in step 2. Touch the "End" key. The touch panel will
return to the contents of the "Basic" tab.
Default menu Setting mode
2x2"
2x2"
2x2"
2x2"
Default menu Setting mode
50x50mm
50x50mm
50x50mm
50x50mm
(2~11 5 / ) (2~17)
8
" "
2 2
(50~297 ) (50~432)
50 50
mm mm
Close
Up
Down
Change #
Close
Up
Down
Change #
Back Close
Back Close