Kyocera KM-3035 Operation Manual page 172

Section 7 COPIER MANAGEMENT FUNCTIONS
● Default copy limit
Perform the following procedure when you want to change the default
copy limit for new department ID-codes.
1 Select "Def. Val. of coun. limit" under the "Setting item"
column on the left side of the touch panel and then touch the
"Change #" key.
The "Def. Val. of coun. limit" screen will be displayed.
Inch specifications
Managem. Def. Set.
Setting item
Scanner Managem.
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
Default setting - Management - Managem. Def set.
Metric specifications
Managem. Def. Set.
Setting item
Scanner Managem.
Fax Management
Excess of limit Setting
Def. Val. of coun. limit
Total size 1
Total size 2
Total size 3
Default setting - Management - Managem. Def set.
7-34
Value
On
On
Unable to use
999999
1 /
8 x11" No specif.
2
1 /
8 x11" No specif.
Change #
2
1
8 / x11" No specif.
2
Value
On
On
You cannot use
999999
A3 No specif.
B4 No specif.
Change #
A4 No specif.
2 Use the numeric keys on the keypad to enter the default copy
limit. The limit can be set to any 1-page increment up to
999,999.
Inch specifications
Def. Val. of coun. limit
Default value of counter limit can be set.
Close
Default setting - Management - Managem. Def set.
Metric specifications
Def. Val. of coun. Limit
Default value of counter limit can be set.
Close
Default setting - Management - Managem. Def set.
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 1.
3 Touch the "Close" key.
The touch panel will return to the screen in step 1.
Back
(1~999,999)
Limited value 999,999
Clear
Back
(1~999,999)
Limited value 999,999
Clear
Close
Close