Kyocera KM-3035 Operation Manual page 202

Section 7 COPIER MANAGEMENT FUNCTIONS
Default setting
Cover drawer[cassette] Sets which drawer[cassette] will be used to feed the
cover sheets in the cover mode, the booklet/stitching
mode and the book to booklet mode.
* The setting for drawer[cassette] No.3 and No.4 will
Default magnification Sets whether or not the auto magnification selection
ratio mode will be used to automatically calculate the
appropriate magnification ratio when you select the
size of copy paper.
Auto exposure Adjusts the overall exposure level for the auto
adjustment exposure mode.
Auto exposure Adjusts the overall exposure level for scanning with
adjustment (OCR) OCR (Optical Character Recognition) software when
using the optional scanner functions of this copier.
Manual exposure Adjusts the median exposure value when the
adjustment (text+photo text+photo mode is selected for the image quality.
mode)
Manual exposure Adjusts the median exposure value when the text
adjustment (text mode) mode is selected for the image quality.
Manual exposure Adjusts the median exposure value when the photo
adjustment (photo mode is selected for the image quality.
mode)
Sort/Finished mode ON/ Determines whether or not the Sort and/or the
OFF Finished modes will be the default setting in the
initial mode.
Auto Rotation mode Determines whether or not the Auto Rotation mode
will be the default setting in the initial mode. If Auto
Rotation is turned ON, the image will be
automatically rotated even if the orientation of the
original is different from that of the paper loaded in
the drawers[cassettes].
Margin width Determines the default value of the location and
width of the margins in the margin mode.
7-60
Description
only be available when the optional Paper Feeder
is installed on your copier.
Available settings
1st paper Bypass
2nd paper
3rd paper
4th paper
Bypass
Manual / AMS Manual
-3 – +3 Standard setting
(0)
-3 – +3 Standard setting
(0)
-3 – +3 Standard setting
(0)
-3 – +3 Standard setting
(0)
-3 – +3 Standard setting
(0)
Sort mode : Sort mode :
On / Off On
Finished mode : Finished mode :
Off / On [1 set (Output Off
each page) ]
Rotate / No Rotate Rotate
Inch specification Inch
0 – 3/4 (inches) specification
Metric specification Left: 1/4 (inches)
0 – 18 (mm) Top: 0 (inches)
Metric
specification
Left: 6 (mm)
Top: 0 (mm)
Factory Reference
setting page
7-71
7-72
7-73
7-74
7-75
7-76
7-77
7-78
7-79
7-80